Tribute 2WD V6-3.0L (2008)
8. Remove the engine support crossmember front insulator bolt.
-
To install, tighten to 120 N.m {12 kgf.m, 89 ft.lbf}.
9. Remove the 2 engine support crossmember bolts.
-
To install, tighten to 90 N.m {9.0 kgf.m, 66 ft.lbf}.
10. Remove the nut and the engine support cross-member. Discard the nut
-
To install, tighten to 17.5 N.m {17.8 kgf.m, 129 ft.lbf}.