Tribute 2WD V6-3.0L (2008)
2. Using a pocket screwdriver, or similar tool, remove the sensor locking clip.
Caution
^
Do not use a large screwdriver. Apply minimum force during removal or damage to the sensor locking clip can occur.
3. Using a pocket screwdriver, or similar tool, detach the sensor from the cradle.
4. Remove the sensor.
Caution
^
Do not use a large screwdriver. Apply minimum force during removal or damage to the sensor can occur.
Installation
1. Position the sensor into the cradle by inserting the hinge end of the sensor into the hook end of the cradle and pushing the opposite end of the
sensor down onto the cradle.
Caution
^
Damage to the sensor can occur if excessive force is applied during sensor installation.
