mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/T - Fluid Weepage From Cooler Line|Page 3130 > < A/T - Fluid Weepage From Cooler Line|Page 3124
Page 1
background image

Fluid Line/Hose: Customer Interest
A/T - Fluid Weepage From Cooler Line

TSB: 05-006/07

2008 TRIBUTE - CD4E TRANSAXLE FLUID WEEP FROM TRANSAXLE OIL COOLER LINE

APPLICABLE MODEL(S)/VINS
2008 Tribute vehicles equipped with a CD4E transaxle 
built before March 1, 2007

DESCRIPTION

Some Tribute vehicles equipped with a CD4E transaxle may have transaxle fluid weeping from the transaxle cooler line next to the hose clamp (constant
tension spring type clamp).

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

2.

Check cooler line rubber hose is fully installed by pushing rubber hose to stop bead. Do not push rubber hose beyond stop bead.

3.

Install one (1) additional new hose clamp (screw worm gear type) next to original hose clamp.

Tightening torque: 28 lb-in (3.2 Nm).

4.

Check ATF and top off with MERCON(R) V as needed to bring ATF to recommended level.

5.

Verify repair.

PART(S) INFORMATION

WARRANTY INFORMATION

NOTE:

A/T - Fluid Weepage From Cooler Line|Page 3130 > < A/T - Fluid Weepage From Cooler Line|Page 3124