Tribute 2WD V6-3.0L (2008)
1. Install the transaxle range (TR) sensor and loosely install the bolts.
Note
^
Make sure the transaxle is in the NEUTRAL position.
2. Using the special tool, align the TR sensor and tighten the bolts.
^
Tighten to 11 N-m (1.1 kgf-m, 8 ft-lbf).
3. Connect the TR sensor electrical connector.
4. Install the battery and tray.
5. Check the correct operation. The engine should start only in PARK or NEUTRAL. The reverse lamps should illuminate in the REVERSE position.
