Tribute 2WD V6-3.0L (2008)
Clutch Pedal Assembly: Service and Repair
CLUTCH PEDAL REMOVAL/INSTALLATION
Clutch Pedal
1. Disconnect the master cylinder push rod.
2. Remove the 2 clutch master cylinder nuts.
^
To install, tighten to 23 N-m (2.3 kgf-m, 17 ft-lbf).
3. Remove the clutch pedal and bracket assembly nut.
4. Disconnect the clutch master cylinder rod from the clutch pedal.
^
To install, tighten to 23 N-m (2.3 kgf-m, 17 ft-lbf).
5. Remove the clutch pedal and bracket assembly.
6. To install, reverse the removal procedure.