Tribute 4WD L4-2.3L (2005)
Caution:
^
Failure to hold the crankshaft pulley in place while tightening the bolt can cause damage to the engine front cover.
3. Using the special tools to hold the crankshaft pulley in place, tighten the crankshaft pulley bolt in two stages:
^
Stage 1: Tighten to 100 Nm (10.2 kgf-m, 74 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees (1/4 turn).
4. Remove the 6 mm (0.23 inch) x 18 mm (0.7 inch) bolt.
5. Remove the special tool.
6. Remove the special tool.
