Tribute 4WD L4-2.3L Hybrid (2008)
Speaker: Service and Repair
Subwoofer Speaker Removal/Installation
SUBWOOFER SPEAKER REMOVAL/INSTALLATION
NOTE: The subwoofer speaker, amplifier, and enclosure are only replaced as a complete assembly.
1. Remove the RH quarter trim panel. See - See: Body and Frame/Interior Moulding / Trim/Trim Panel/Locations.
2. Disconnect the subwoofer amplifier electrical connector.
3. Remove the 3 bolts and the subwoofer speaker.
-
To install, tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.
4. To install, reverse the removal procedure.