Tribute 4WD L4-2.3L Hybrid (2008)
10. Remove the 2 engine support crossmember bolts.
-
To install, tighten to 90 Nm {9.0 kgf-m, 66 ft-lbf}.
11. Remove the nut and the engine support crossmember. Discard the nut.
-
To install, tighten to 17.5 Nm {17.8 kgf-m, 129 ft-lbf}.
12. Remove the rear transaxle support isolator through bolt.
-
To install, tighten to 120 Nm {12.2 kgf-m, 89 ft-lbf}.
13. Remove the power steering coupler bolt. Discard the bolt.
-
To install, tighten to 25 Nm {2.5 kgf-m, 18 ft-lbf}.
