Tribute 4WD L4-2.3L Hybrid (2008)
13. If equipped, remove the screw and the garment hook.
-
Open the garment hook screw cover.
-
Remove the garment hook screw.
-
To install, tighten to 7 Nm {0.7 kgf-m, 62 in-lbf}.
14. If equipped, remove the headliner trim ring.
NOTE: When installing the headliner trim ring, it should meet at the rear of the roof opening and have no gaps or overlaps.
15. Remove the 5 headliner pin-type retainers.
16. Remove the headliner.
17. To install, reverse the removal procedure.
-
Transfer parts as necessary.