Tribute 4WD L4-2.3L Hybrid (2008)
5. Feed the side air bag deployment chute and clips back through the opening in the backrest foam pad.
WARNING: Check the seat side air bag deployment chute for damage. The deployment chute must not be repaired. If there is any damage to the
deployment chute, a new seat back trim cover and deployment chute must be installed as a unit. Failure to follow these instructions may result in the seat
side air bag module deploying incorrectly and increase the risk of serious personal injury or death in a crash.
6. Install the side air bag module deployment chute and J-clips around the side air bag module and seat backrest frame.
WARNING: If the seat side air bag module deployment chute is not correctly positioned and closed, the seat side air bag module may not deploy
correctly. Failure to follow these instructions may result in the seat side air bag module deploying incorrectly and increases the risk of serious personal
injury or death in a crash.
7. Roll the trim cover down the backrest and fasten the hook-and-loop strips.
