Tribute 4WD L4-2.3L Hybrid (2008)
2. Release the cushion trim cover retainers and remove the cushion trim cover.
-
Separate the hook-and-loop strips.
CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the seat
cushion foam pad.
3. Bend the retaining tab away from the pressure sensor, then slide the pressure sensor off the bracket.
4. Remove the 2 rivets and detach the OCSM from the seat cushion frame.
CAUTION: Care must be taken to prevent damage to the seat cushion frame when removing the rivets.
