Tribute 4WD L4-2.3L Hybrid (2008)
8. Verify that the brake pad anti-rattle spring is correctly latched by pulling on the spring.
CAUTION: The latch MUST be positioned as shown, or damage to component may occur.
9. Install the wheel and tire. See See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
10. Install the battery junction box (BJB) fuses 9 (50A) and 18 (50A).
11. Connect the battery. See See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Disconnect.
12. Fill the brake master cylinder reservoir with clean, specified brake fluid.
13. Test the brakes for normal operation.