Tribute 4WD L4-2.3L Hybrid (2008)
-
To install, tighten to 27 Nm {2.7 kgf-m, 20 ft-lbf}.
6. Remove the 2 parking brake control nuts.
-
To install, tighten to 27 Nm {2.7 kgf-m, 20 ft-lbf}.
7. Remove the parking brake control.
-
Disconnect the front parking brake cable.
8. To install, reverse the removal procedure.
NOTE: Make sure that the cable is in the groove on the control wheel prior to final tightening of fasteners.
