Tribute 4WD L4-2.3L Hybrid (2008)
13. Install the engine plug bolt.
-
Tighten to 20 Nm {2.0 kgf-m, 15 ft-lbf}.
14. Install the accessory drive belt. See - See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.
15. Install the front RH wheel and tire. See See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
16. Install the valve cover. See - See: Cylinder Head Assembly/Valve Cover/Service and Repair.
17. Install the direct current/direct current (DC/DC) converter. See - See: Hybrid Drive Systems/Power Control System/Voltage Converter/Service and
Repair/Direct Current/Direct Current (DC/DC) Converter Removal/Installation.
18. Install the degas bottle. See - See: Cooling System/Coolant Reservoir/Service and Repair.
19. Repower the vehicle high voltage traction battery electrical system. See - See: Hybrid Drive Systems/Power Control System/Voltage
Converter/Service and Repair/Direct Current/Direct Current (DC/DC) Converter Removal/Installation.
20. Connect the battery ground cable. See See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Disconnect.