Tribute 4WD L4-2.3L Hybrid (2008)
5. Install the 4 bolts.
-
Tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
6. Install the remaining oil pan bolts and tighten the oil pan bolts in the sequence shown to 25 Nm {2.5 kgf-m, 18 ft-lbf}.
7. Install the oil level indicator tube O-ring seal.
-
Lubricate a new O-ring seal with clean engine oil.
8. Install the oil level indicator tube.
9. Install the upper oil level indicator tube bolt.
-
Tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
10. Install the lower oil level indicator tube bolt.
-
Tighten to 47 Nm {4.7 kgf-m, 35 ft-lbf}.
11. Install the oil level indicator.
12. Install the flywheel.