Tribute 4WD Hybrid 2008 Engine Timing Components Specification
4. Remove the engine mount. See - See: Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Service and Repair/Removal and
Replacement.
5. Using the special tool, remove the crankshaft front oil seal.
CAUTION: Use care not to damage the engine front cover or the crankshaft when removing the seal.
6. Remove the 3 bolts and the water pump pulley.
7. Remove the 3 bolts and the accessory drive belt tensioner.
8. Disconnect the crankshaft position (CKP) sensor electrical connector.
9. Remove and discard the CKP sensor.
NOTE: Whenever the CKP sensor is removed, a new one must be installed, using the alignment tool supplied with the new part.
