Tribute 4WD L4-2.3L Hybrid (2008)
Exhaust Pipe: Procedures
EXHAUST SYSTEM ALIGNMENT
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Loosen all fasteners joining the exhaust system components.
3. Beginning at the front of the vehicle, align the exhaust system to establish the maximum clearance. Make sure all fit pipes are pushed all the way
into the preceding pipe and the notches are correctly lined up with the tabs.
4. Beginning at the front of the vehicle, tighten all fasteners and clamps to specification. See See: Removal and Replacement/Muffler And Tailpipe
Removal/Installation.
5. Start the engine and check the exhaust system for leaks.