Tribute 4WD L4-2.3L Hybrid (2008)
5. Remove the TXV stud.
-
To install, tighten to 11 Nm {1.1 kgf-m, 8 ft-lbf}.
6. To install, reverse the removal procedure.
-
Install new O-ring seals.
5. Remove the TXV stud.
-
To install, tighten to 11 Nm {1.1 kgf-m, 8 ft-lbf}.
6. To install, reverse the removal procedure.
-
Install new O-ring seals.