Tribute 4WD L4-2.3L Hybrid (2008)
Oil Injection Using a Dye/Lubricant Injector
NOTE: If fluorescent leak detection dye is also to be added during A/C charging, the dye may be added to the dye/lubricant injector along with the
refrigerant oil.
1. Evacuate the refrigerant system. See See: Service and Repair/Air Conditioning (A/C) System Evacuation And Charging.
2. Assemble the dye/lubricant injector using the correct adapters to match the amount of PAG oil to be injected.
3. Verify that all the valves on the dye/lubricant injector are closed.
4. Fill the dye/lubricant injector with the correct amount of clean PAG oil.
5. Install the dye/lubricant injector between the low-side gauge port valve and the refrigerant station or manifold gauge set.
6. Open all the valves and charge the refrigerant system. See See: Service and Repair/Air Conditioning (A/C) System Evacuation And Charging.