Tribute 4WD L4-2.3L Hybrid (2008)
d. Inflate tire using the remote valve and pressure gauge until the beads have seated or until the pressure gauge is 20 psi more than the maximum
inflation pressure on tire sidewall. If beads have not seated, deflate the tire and proceed to the next step.
e. Place the wheel and tire assembly in an OSHA approved tire safety cage.
f.
Inflate the tire using the remote valve and pressure gauge until the beads have seated or until the pressure gauge is 40 psi more than the
maximum inflation pressure on the tire sidewall.Do not exceed 40 psi above the maximum pressure on the tire sidewall. Install a new tire
if the beads do not seat at this pressure.
6. Install the wheel and tire assembly. See See: Wheels/Service and Repair.
