mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Electrical - No Crank/No TCM Communication/Multiple DTCs|Page 3431 > < Diagram Information and Instructions|Page 3422
Page 1
background image

Grounding Point: Customer Interest
Electrical - No Crank/No TCM Communication/Multiple DTCs

Bulletin No.: 01-011/08

Last Issued: 3/7/2008

Subject:
HYBRID - NO CRANK / NO TCM COMMUNICATION / THEFT LIGHT ON / MULTIPLE DTCs

APPLICABLE MODEL(S)/VINs
2008 Tribute Hybrid

DESCRIPTION

Some 2008 Tribute Hybrid vehicles may exhibit a theft lamp on, no communication with the Transmission Control Module (TCM), no crank, and/or
multiple Diagnostic Trouble Codes (DTCs) including the following:

-

P0500 - Vehicle Speed Sensor (A)

-

P0685 - Powertrain Control Module (PCM) Power Relay Control Circuit/Open

-

P0A18 - Motor Torque Sensor Circuit Range/Performance

-

P0A23 - Generator Torque Sensor Circuit Range/Performance

-

P1000 - On-Board Diagnostic (OBD) Systems Readiness Test Not Complete

-

P1A0C - Hybrid Powertrain Control Module - Engine Disabled

-

P1A0E - Hybrid Powertrain Control Module - Motor Disabled

-

P2105 - Throttle Actuator Control (TAC) System - Forced Engine Shutdown

-

U0101 - Lost Communication With Transaxle Control Module (TCM)

Customers having this concern should have their vehicle repaired using the following repair procedure.wing repair procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

Electrical - No Crank/No TCM Communication/Multiple DTCs|Page 3431 > < Diagram Information and Instructions|Page 3422