Tribute 4WD L4-2.3L Hybrid (2008)
2.
Inspect ground # 5 located on the driver side frame rail next to the transaxle and under the Battery Junction Box (BJB). Remove the # 5 ground
fastener and examine the trademark located on the head of the ground fastener.
-
If the fastener displays an arrowhead trademark located above the 8.8 property class stamp, replace the ground # 5 fastener with a new fastener
and torque the new fastener to 15 lb-ft (20 Nm).
-
If the fastener has the wave line trademark under the 8.8 property class stamp, remove any excess paint or debris from the fastener threads with
a nylon or wire brush. Reinstall the ground # 5 fastener and torque the fastener to 15 lb-ft (20 Nm).
3.
Verify repair.
PART(S) INFORMATION