Tribute 4WD L4-2.3L Hybrid (2008)
Body Control Module: Service and Repair
Smart Junction Box (SJB) Removal/Installation
SMART JUNCTION BOX (SJB) REMOVAL/INSTALLATION
Removal
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
NOTE: Prior to the replacement of the module, it is necessary to upload the module configuration information to a scan tool. This information must be
downloaded into the new smart junction box (SJB) after installation. See See: Testing and Inspection. In the event that As-Built data is required (SJB
will not communicate), all remote keyless entry (RKE) devices must be programmed to the new SJB. A minimum of 2 RKE devices are necessary to
complete the configuration and turn off the flashing interior lights.
