Tribute 4WD L4-2.3L Hybrid (2008)
Refueling Vapor Recovery System: Service and Repair
Fuel Vapor Vent Valve Removal/Installation
-
FUEL VAPOR VENT VALVE REMOVAL/INSTALLATION - HYBRID
1. Remove the evaporative emissions (EVAP) canister assembly. See - See: Evaporative Emission Control Canister/Service and Repair.
2. Disconnect the fuel vapor vent valve electrical connector.
3. Disconnect the fuel vapor tube assembly-to-fuel vapor vent valve quick connect coupling. See - See: Fuel Delivery and Air Induction/Fuel Line
Coupler/Service and Repair/Quick Release Coupling - Double Locking.
4. Depress the tab and remove the fuel vapor vent valve from the EVAP canister bracket.
5. To install, reverse the removal procedure.
-
Carry out the evaporative emissions system leak test. See See: Testing and Inspection/Component Tests and General Diagnostics.