Tribute 4WD L4-2.3L Hybrid (2008)
Inertia Fuel Shutoff Switch: Removal and Replacement
INERTIA FUEL SHUTOFF (IFS) SWITCH REMOVAL/INSTALLATION
1. Remove the RH lower A-pillar trim panel. See See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and
Repair.
2. Disconnect the inertia fuel shutoff (IFS) switch.
3. Remove the 2 bolts and the IFS switch.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
4. To install, reverse the removal procedure.
