Tribute 4WD L4-2.3L Hybrid (2008)
Intake Air Duct: Service and Repair
Air Cleaner Intake Pipe Removal/Installation
-
AIR CLEANER INTAKE PIPE REMOVAL/INSTALLATION - HYBRID
1. Remove the battery tray. See See: Starting and Charging/Battery/Battery Tray/Service and Repair.
2. Remove the bolt and the air cleaner intake pipe.
-
To install, tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.
3. To install, reverse the removal procedure.
NOTE: Make sure the front sponge seal of the intake pipe is seated on the shroud panel.