Tribute 4WD L4-2.3L Hybrid (2008)
WARNING: Always use new torque-prevailing type J-nuts when installing the safety canopy in the vehicle. Use of these J-nuts is mandatory to reduce
the risk of loss of fastener effectiveness. Failure to follow this instruction may result in the safety canopy module deploying incorrectly and increases the
risk of serious personal injury or death in a crash.
1. Install new safety canopy module J-nuts.
2. Position the safety canopy and insert the rear hook into the sheet metal cavity.
NOTE: If equipped with a moonroof and/or rear window wiper assembly, make sure of correct moonroof drain hose and/or rear window solvent hose
routing.
