mazda Workshop Repair Guides

Mazda Tribute 4WD Hybrid Workshop Service and Auto Repair Manuals

Impact Sensor > < Clockspring Assembly / Spiral Cable, Air Bag|Service and Repair|Page 4401
Page 4
background image

8. Install the steering wheel. See  See: Steering and Suspension/Steering/Steering Wheel/Service and Repair.

CAUTION: To prevent damage to the clockspring make sure the road wheels are in the straight-ahead position.

NOTE: The clockspring inner rotor, wiring and connector must be in the 12 o'clock position to install the steering wheel.

9. If a new clockspring was installed, remove the anti-rotation key.

10. Install the driver air bag module. See  See: Air Bag/Service and Repair/Driver Air Bag Module Removal/Installation.

11. Repower the system. See  See: Air Bag(s) Arming and Disarming/Service and Repair/Supplemental Restraint System (SRS) Depowering And

Repowering.

Impact Sensor > < Clockspring Assembly / Spiral Cable, Air Bag|Service and Repair|Page 4401