Tribute 4WD L4-2.3L Hybrid (2008)
-
To install, tighten to 48 Nm {4.8 kgf-m, 35 ft-lbf}.
5. Remove the bolt and the rear safety belt retractor.
-
To install, tighten to 48 Nm {4.8 kgf-m, 35 ft-lbf}.
6. To install, reverse the removal procedure.
7. Check the active restraint system for correct operation.
-
Make sure that after the rear safety belt retractor is installed, the retractor is not in the automatic locking retractor (ALR) mode. See - See:
Description and Operation.
