Tribute 4WD L4-2.3L Hybrid (2008)
5. Remove the seat cushion and pan assembly.
-
To aid in removal, recline the seat.
CAUTION: While positioning the seat cushion pan and occupant classification sensor assembly, be careful not to damage any of the components.
Failure to do so can result in component failure.
6. Detach the seat cushion trim cover J-clips from the seat cushion pan and remove the seat cushion trim cover.
CAUTION: Use care when separating the seat upholstery from the hook-and-loop strip, or the hook-and-loop strip can be torn from the seat cushion
foam pad.
7. Bend the retaining tab away from the pressure sensor, then slide the pressure sensor off the bracket.
8. Remove the 2 rivets and detach OCS ECU from the seat cushion pan.
CAUTION: Care must be taken to prevent damage to the seat cushion pan when removing the rivets. Failure to follow these instructions may result in
component damage and/or system failure.
