Tribute 4WD L4-2.3L Hybrid (2008)
Steering Wheel: Service and Repair
STEERING WHEEL REMOVAL/INSTALLATION
1. Remove the driver air bag module. See See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Air Bag Module
Removal/Installation.
2. Disconnect the steering wheel switch electrical connector from the clockspring.
-
Detach the steering wheel switch wiring from the retainers and position the wires aside.
3. Remove the steering wheel bolt.
-
To install, tighten to 40 Nm {4.0 kgf-m, 30 ft-lbf}.