Tribute 4WD L4-2.3L Hybrid (2008)
8. Remove the 6 bolts and the rivet from the LH splash shield and remove the splash shield.
9. Remove the engine support crossmember front insulator bolt.
-
To install, tighten to 120 Nm {12 kgf-m, 89 ft-lbf}.
8. Remove the 6 bolts and the rivet from the LH splash shield and remove the splash shield.
9. Remove the engine support crossmember front insulator bolt.
-
To install, tighten to 120 Nm {12 kgf-m, 89 ft-lbf}.