Tribute 4WD L4-2.3L Hybrid (2008)
Wheel Bearing: Service and Repair
Wheel Bearing And Wheel Hub Removal/Installation
WHEEL BEARING AND WHEEL HUB REMOVAL/INSTALLATION
Removal
NOTE: If removing the wheel hub, a new wheel bearing must be installed.
1. Remove the wheel knuckle. See See: Front Steering Knuckle/Service and Repair.
2. Using the special tool, press the wheel hub from the wheel bearing.
3. Using the special tool, press the inner wheel bearing race from the wheel hub.
NOTE: This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle after removing the wheel hub.
4. Remove the snap ring.