Tribute 4WD L4-2.3L Hybrid (2008)
Tires: Service and Repair
WHEEL AND TIRE DISASSEMBLY/ASSEMBLY
Disassembly
CAUTION: Failure to follow the instructions below may result in damage to the tire pressure sensor.
CAUTION: Use only special tool 204-354 any time tire pressures are measured to be sure that accurate values are obtained.
NOTE: A wheel and tire assembly equipped with a tire pressure monitoring system (TPMS) sensor will have the following verbiage stamped or cast on
the wheel: "Sensor May Be Inside".
NOTE: The TPMS sensor is mounted to the wheel 180 degrees opposite of the valve stem and is held in place by a stainless steel strap. The sensor is
not mounted to the valve stem.
