Tribute 4WD L4-2.3L Hybrid (2008)
1. Using the special tools, install a new wheel bearing into the wheel knuckle.
2. Install the wheel bearing snap ring.
3. Using the special tools, install the wheel hub into the wheel bearing.
FWD vehicles
1. Install the ABS wheel speed sensor ring.
2. Install the wheel hub nut.
-
Tighten to 290 Nm {29.0 kgf-m, 214 ft-lbf}.
AWD vehicles
1. Install the wheel knuckle. See -- See: Suspension/Rear Knuckle/Service and Repair.
