Tribute 4WD L4-2.3L Hybrid (2008)
Universal Joint: Description and Operation
-
UNIVERSAL JOINT - CENTER AND REAR
The U-joints allow the speeding up and slowing down of the driveshaft as the angularity of the driveshaft changes.The center and rear joints are:
-
a lubed-for-life design that requires no periodic lubrication.
-
equipped with nylon thrust washers, located at the base of each bearing cup, which control end play, position the needle bearings, and improve
grease movement.
-
staked in place U-joints and are not serviced individually. If the joints are worn or damaged, install a new propeller shaft assembly.
-
snap ring type U-joints that can be replaced if worn or damaged.
