Tribute 4WD L4-2.3L Hybrid (2008)
4. Remove the ABS wheel speed sensor bolt and position the sensor aside.
5. Remove the lower arm pinch bolt and nut from the lower arm. Discard the nuts and bolts.
NOTE: Do not allow the ball joint stud to contact the CV joint boot.
6. Separate the lower arm from the front wheel knuckle.
7. Using the Front Hub Remover, separate the front drive halfshafts from the front wheel hubs.
Left halfshaft
1. Using the Halfshaft Remover and Slide Hammer, remove the front drive halfshaft from the differential.
Right halfshaft
