Tribute 4WD L4-2.3L Hybrid (2008)
Wheel Bearing: Testing and Inspection
WHEEL BEARING INSPECTION
1. Raise the vehicle until the front tires are off the floor.
-
Make sure the wheels are in a straight forward position.
WARNING: The electrical power to the air suspension system must be off prior to hoisting, jacking or towing an air suspension vehicle. This can be
accomplished by turning off the air suspension switch. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result
in shifting of the vehicle during these operations.
2. Spin the tire by hand to check the wheel bearings for roughness.
NOTE: Make sure the wheel rotates freely and that the brake pads are retracted sufficiently to allow free movement of the wheel and tire assembly.
3. Grip each tire at the top and bottom and move the wheel inward and outward while lifting the weight of the tire off the front wheel bearing.
4. If the tire and wheel (hub) is loose on the spindle, does not rotate freely, or has a rough feeling when spun, carry out one of the following:
-
On vehicles with inner and outer bearings, inspect the bearings and cups for wear or damage. Adjust or install new bearings and cups as
necessary.
-
On vehicles with one sealed bearing, install a new wheel hub.
