Tribute 4WD L4-2.3L Hybrid (2008)
5. Disconnect the 2 liftgate glass cylinders.
a. Slide the spring retainer to the end of the socket.
b. Disconnect the socket from the ball stud.
NOTE: An assistant may be needed to carry out this step.
6. Remove the 2 liftgate glass hinge nuts and the liftgate glass.
-
To install, tighten to 7 Nm {0.7 kgf-m, 62 in-lbf}.
NOTE: An assistant may be needed to carry out this step.
7. To install, reverse the removal procedure.
-
Transfer components as necessary.
