Tribute 4WD L4-2.3L Hybrid (2008)
3. Open the front overhead console door, remove the 2 screws and the overhead console.
-
If equipped, disconnect the electrical connector.
4. Remove the interior rear view mirror. See - See: Body and Frame/Mirrors/Description and Operation/Exterior Rear View Mirrors - Principles Of
Operation.
5. Remove the LH and RH sun visors and visor clips.
-
If equipped, disconnect the electrical connectors.
6. Partially lower the front portion of the headliner and block with a suitable material.
7. Remove the cowl panel grille. See See: Body and Frame/Cowl/Service and Repair.
8. Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.
9. Using the special tool, cut the urethane adhesive from the windshield glass starting at the top center and working toward the bottom corners.
NOTE: Lubricate the urethane adhesive with water to aid the special tool when cutting.
