Tribute 4WD L4-2.3L Hybrid (2008)
Wiper Blade: Service and Repair
Wiper Blade - Rear Removal/Installation
WIPER BLADE - REAR REMOVAL/INSTALLATION
Removal
CAUTION: Lifting the wiper arm beyond its maximum angle may result in damage to the wiper arm or the wiper arm heel.
CAUTION: Allowing the wiper arm to contact the glass may result in damage to the glass.
1. Hold the wiper arm with one hand close to the wiper arm and wiper blade pivot joint and lift the arm to its maximum angle.
2. Hold the primary structure of the wiper blade with the other hand close to the wiper arm and wiper blade pivot joint.
3. Tightly grip and push on the wiper arm and wiper blade joint from beneath and separate the blade from the arm.
Installation
1. Attach the new wiper blade on the wiper arm and press it into place until a snap is heard.
2. To install, reverse the removal procedure.
