Tribute 4WD L4-2.3L Hybrid (2008)
Wiper Pivot: Service and Repair
Wiper Mounting Arm And Pivot Shaft Removal/Installation
WIPER MOUNTING ARM AND PIVOT SHAFT REMOVAL/INSTALLATION
1. Remove the cowl top vent panels. See See: Body and Frame/Cowl/Service and Repair.
2. Remove the 3 windshield wiper mounting arm and pivot shaft assembly bolts and the windshield wiper mounting arm and pivot shaft assembly.
-
To install, tighten to 9 Nm {0.9 kgf-m, 80 in-lbf}.
3. Disconnect the windshield wiper motor electrical connector.
4. Remove the wiper motor assembly. See See: Wiper Motor/Service and Repair/Windshield Wiper Motor Removal/Installation.
5. To install, reverse the removal procedure.
