mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Keyless Entry|Description and Operation|Page 5221 > < Keyless Entry|Description and Operation
Page 2
background image

Auto-Unlock

NOTE:The doors will not auto-unlock if the vehicle has been electronically locked before the driver door is opened.
The auto-unlock feature unlocks all the doors when the ignition is in the ON position, all the doors are closed, and the vehicle has been in motion at a
speed greater than 20 km/h (12 mph), the vehicle then comes to a stop and the ignition is switched to LOCK or ACC, and the drivers door is opened
within 10 minutes of the ignition being switched to LOCK or ACC.

Smart Unlock

The smart unlock feature prevents the doors from locking with the key in the ignition lock cylinder. When the SJB receives a lock command from a door
lock control switch (only), and the key is in the ignition lock cylinder with one of the front doors open, the SJB commands the doors to unlock.

Remote Keyless Entry (RKE)

The remote keyless entry (RKE) system uses an integrated keyhead transmitter (IKT). The IKT incorporates both the passive anti-theft system (PATS)
functions and the RKE transmitter functions in a single device.The RKE transmitter is programmed automatically during PATS programming. During
PATS programming, the instrument cluster (IC) obtains the transmitter identification code (TIC) from the IKT and sends the TIC data over the medium
speed controller area network (MS-CAN) to the SJB.

The IKT carries out the following functions:

-

Unlock the LH front door

-

Unlock all doors

-

Lock all doors

Keyless Entry|Description and Operation|Page 5221 > < Keyless Entry|Description and Operation