Tribute 4WD L4-2.5L Hybrid (2009)
-
Release the liftgate glass
-
Activate/deactivate the panic alarm
-
Command the interior lamps on (when unlocking) and off (when locking)
-
Sound the horn once when LOCK is pressed twice within 3 seconds, and the doors are closed
-
Sound the horn twice when LOCK is pressed twice within 3 seconds, and any door is ajar
The IKT has a normal operating range of 10 m (33 ft).The SJB accepts programming of up to 4 IKTs. In addition to the IKTs, 4 conventional keyfobs
can also be programmed to the vehicle if requested by the customer. See See: Testing and Inspection/Key Programming Using Two Programmed Keys,
See: Testing and Inspection/Integrated Keyhead Transmitter (IKT) Key Programming Using Diagnostic Equipment, or See: Testing and
Inspection/Remote Keyless Entry Transmitter Programming.
Remote Keyless Entry (RKE) Lock/Unlock Control - Unlock
The RKE feature provides lock/unlock functions independently of key position, vehicle speed, or transmission position. The RKE feature provides a
stepped (if enabled) process for unlocking the doors. Upon receipt of the first request for unlocking the doors, the RKE control feature requests the SJB
to unlock the driver door only. If another unlock request is received within 3 seconds of the first, the RKE feature requests the SJB to unlock all the
doors. This feature can be changed to global unlock, so that all the doors unlock on the first press of the unlock button. See See: Testing and
Inspection/Stepped Unlock Programming.
Remote Keyless Entry (RKE) Lock/Unlock Control - Lock
The RKE feature requests that all the doors be locked when the lock button is pressed. On any press of the lock button with all doors closed, the SJB
provides 1 flash of the turn signals. If any door is ajar, no flash occurs. As soon as the last door is closed, the SJB provides the flash of the turn signals. If
2 presses of the lock button are received within 3 seconds, the horn chirps once and the turn signals flash twice to indicate that all the doors are closed
and locked. If any door is ajar when the second lock request is received within 3 seconds of the first, the RKE transmitter feature requests the SJB to
chirp the horn twice without flashing the turn signals to indicate it locked all the doors but 1 or more doors are ajar. When the key is in the ON or
START position, the turn signal flashes and horn chirp confirmations do not occur.
Remote Keyless Entry (RKE) Liftgate Glass Release
The RKE feature provides liftgate glass release function independently of key position. The liftgate glass release button must be pressed twice within 3
seconds for the liftgate glass to release.
Panic Alarm
The panic alarm feature provides audible and visual alarms which are evident from the exterior of the vehicle. The panic alarm feature requests that the
turn signals are flashed and the horn sounds until deactivation. The flashing of the outputs occurs simultaneously. Activation of the panic alarm is
accomplished by pressing the panic button on an integrated keyhead transmitter (IKT) whenever the key is in the OFF position. At all other times this
feature is disabled. Deactivation of an active PANIC alarm is accomplished by any of the following actions:
-
A second press of the IKT panic button
-
The key is switched out of the OFF position
-
A period of 2 minutes and 45 seconds has elapsed since the initial activation
Perimeter Lighting Feature
Vehicles equipped with perimeter lighting can have this feature activated or deactivated.
NOTE:On vehicles with autolamps, the perimeter lighting feature does not activate in daylight conditions.
The headlamps and parklamps illuminate when the unlock control on the IKT is pressed. The perimeter lighting feature will turn off the lamps if:
-
The ignition switch is turned to the ON position
-
The IKT lock control is pressed
-
After 25 seconds have elapsed since the perimeter lighting was activated
This feature can be activated or deactivated. See See: Lighting and Horns/Testing and Inspection/Programming and Relearning.
