Tribute 4WD L4-2.5L Hybrid (2009)
Front Door Window Regulator: Service and Repair
FRONT DOOR WINDOW REGULATOR REMOVAL/INSTALLATION
1. Remove the front door trim panel. See See: Front Door Panel/Service and Repair.
2. Remove the screw and the front door trim panel bracket.
3. Remove the 3 pushpins and pad assembly.
4. Position the watershield aside.
5. Connect the window control switch electrical connector.
6. Using the window control switch, lower the front door window glass to gain access to the front door window glass screws.
7. Disconnect the window control switch electrical connector.