mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Body - Exterior Door Handles Difficult To Open|Page 5501 > < Front Door Window Regulator|Service and Repair|Page 5490
Page 1
background image

Rear Door Exterior Handle: All Technical Service Bulletins
Body - Exterior Door Handles Difficult To Open

Bulletin No: 09-001/10

Last Issued: 01/07/2010

Subject:
EXTERIOR DOOR HANDLE DIFFICULT TO OPEN

APPLICABLE MODEL(S)/VINS
2008-2010 Tribute built on or before 09/01/2009

DESCRIPTION

Some vehicles may exhibit an exterior door handle that is difficult to open, does not sit flush when released, and/or sticks when opening door. This may
be due to the exterior door handle plunger (1) binding on the door handle cover (2).

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer concern.

2. Remove the exterior door handle and cover on affected door(s) per MS3 online or Workshop Manual (section 09-14 EXTERIOR FRONT DOOR
HANDLE REMOVAL/INSTALLATION) or (section 09-14 EXTERIOR REAR DOOR HANDLE REMOVAL/INSTALLATION).

3. Closely examine the exterior door handle cover for signs of damage; inspect for a groove worn into the cover (A) due to contact with the door handle
plunger. Is any damage present?

a. No - Do not continue with this procedure and follow MS3 online or Workshop Manual (section 09-14 FRONT DOOR HANDLES, LOCKS AND
LATCHES - EXPLODED VIEW) or (section 09-14 REAR DOOR HANDLES, LOCKS AND LATCHES - EXPLODED VIEW).

b. Yes - Replace exterior door handle and cover with revised parts as necessary following MS3 online or Workshop Manual (section 09-14
EXTERIOR FRONT DOOR HANDLE REMOVAL/INSTALLATION) or (section 09-14 EXTERIOR REAR DOOR HANDLE
REMOVAL/INSTALLATION).

Body - Exterior Door Handles Difficult To Open|Page 5501 > < Front Door Window Regulator|Service and Repair|Page 5490