Tribute 4WD L4-2.5L Hybrid (2009)
Keyless Entry: Testing and Inspection
Key Programming Switch State Control
KEY PROGRAMMING SWITCH STATE CONTROL
NOTE:The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key
programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 keys need to be programmed into the instrument cluster
(IC). See See: Key Programming Using Two Programmed Keys. This programmable switch is provided as a convenience for rental company fleets or
other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver.
NOTE:The spare key programming switch state can be viewed with the IC SPAREKEY PID.
NOTE:If the SPAREKEY PID reads ENABLE, up to 8 keys total can be programmed into the IC using See: Key Programming Using Two
Programmed Keys. If the SPAREKEY PID reads DISABLED, the Key Programming Using Two Programmed Keys procedure does not function. This
switch is set to ENABLE when the vehicle is built. This PID does not affect the Spare Key Programming - Using Diagnostic Equipment or the Spare Key
Programming - Unlimited Key Mode procedures.
1. Insert a programmed passive anti-theft system (PATS) key (or integrated keyhead transmitter [IKT] key) into the ignition lock cylinder and turn
the key from the OFF position to the ON position.
2. From the scan tool, enter TOOLBOX. Select BODY - SECURITY - PATS Functions and follow the on-screen instructions to ENTER
SECURITY ACCESS. See See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and
Relearning/Anti-Theft Security Access.
3. From the scan tool menu select: CUSTOMER SPARE KEY PROGRAMMING ENABLE and follow the integrated diagnostic system (IDS)
on-screen instructions in order to complete the procedure.
CUSTOMER SPARE KEY PROGRAMMING ENABLE - spare key programming procedure is accessible.
CUSTOMER SPARE KEY PROGRAMMING DISABLE - spare key programming procedure is not accessible.
NOTE:The default setting on delivery of all new vehicles is ENABLED, when viewing the IC SPAREKEY PID.
