Tribute 4WD L4-2.5L Hybrid (2009)
7. Install the cushion trim cover and attach the cushion trim cover retainers to the cushion frame.
CAUTION:Inspect the seat cushion pad and seat cushion trim cover for any foreign objects, before installing the seat cushion trim cover to the seat
cushion pad. If any foreign objects are found, remove them. Failure to follow these instructions may result in incorrect operation of the occupant
classification sensor (OCS) system and may cause system failure.
8. Position the seat cushion to the seat track.
CAUTION:While positioning the seat cushion frame and occupant classification sensor (OCS), be careful not to damage any of the components. Failure
to do so can result in component failure.
9. Install the 4 seat track bolts.
-
Tighten to 23 Nm {2.3 kgf-m, 17 ft-lbf}.
10. Connect the electrical connectors and wiring clips.
a. Connect the OCSM electrical connector.
b. Connect the pressure sensor electrical connector.
i.
Install the 2 wiring clips on the wiring harness to the cushion frame.
Seat with OCS service kit
