Tribute 4WD L4-2.5L Hybrid (2009)
16. Reposition the special tool to the slot on the rear of the intake camshaft only.
17. Using a small pick tool, unlock the chain tensioner ratchet through the lower front cover timing hole.
-
Using the flats of the camshaft, have an assistant rotate the exhaust camshaft clockwise to collapse the timing chain tensioner plunger.
-
Insert an M6 x 30 mm (1.18 in) bolt into the upper front cover timing hole to hold the tensioner arm in the retracted position.
NOTE:Releasing the ratcheting mechanism in the timing chain tensioner allows the plunger to collapse and create slack in the timing chain. Installing an
M6 x 18mm (1.18 in) bolt into the upper front cover timing hole will hold the tensioner arm in a retracted position and allow enough slack in the timing
chain for removal of the exhaust camshaft gear.
