Tribute 4WD L4-2.5L Hybrid (2009)
11. Using the 6 mm (0.23 in) x 18 mm (0.7 in) bolt, check the position of the crankshaft pulley.
-
If it is not possible to install the bolt, the engine valve timing must be corrected by repeating this procedure.
CAUTION:Only hand-tighten the bolt or damage to the front cover can occur.
12. Install the special tool to check the position of the camshafts.
-
If it is not possible to install the special tool, the engine valve timing must be corrected by repeating this procedure.